Search:  This Site | People | Departments | Penn State

Pubs

In Journals

B. Ren, C.J. Lissenden, 2016, “Modal content based damage indicators for disbonds in adhesively bonded composite structures,” Structural Health Monitoring Int. J., Vol. 15, pp. 491-504.

J. Zhao, V.K. Chillara, B. Ren, H. Cho, J. Qiu, C.J. Lissenden, 2016, “Second harmonic generation in composites: theoretical and numerical analyses,” J. Appl. Phys., Vol. 119, 064902 (14 pages).

V.K. Chillara, C.J. Lissenden, 2016, “Constitutive model for third harmonic generation in elastic solids,” Int. J. Nonlinear Mechanics, Vol. 82, pp. 69-74.

B. Ren, C.J. Lissenden, 2016, “PVDF Multi-Element Lamb Wave Sensor for Structural Health Monitoring” IEEE UFFC Vol. 63(1), pp. 178-185.

V.K. Chillara, C.J. Lissenden, 2016, “Review of nonlinear ultrasonic guided wave nondestructive evaluation: theory, numerics and experiments,” Optical Engineering, Vol. 55(1), 011002 (16 pages).

V.K. Chillara, B. Ren, C.J. Lissenden, 2016, “Guided wave mode selection for inhomogeneous elastic waveguides using frequency domain finite element approach,” Ultrasonics, Vol. 67, pp. 199-211.

B. Ren, C.J. Lissenden, 2015, “Phased array transducers for ultrasonic guided wave mode control and identification for aircraft structural health monitoring,” Materials Evaluation, Vol. 73(8), pp. 1089-1100.

V.K. Chillara, C.J. Lissenden, 2015, “On some aspects of material behavior relating microstructure and ultrasonic higher harmonic generation,” Int. J. Engng. Sci., Vol. 94, pp. 59-70.

C.J. Lissenden, Y. Liu, J.L. Rose, 2015, “Use of nonlinear ultrasonic guided waves for early damage detection,” Insight, Vol. 57(4), pp. 206-211.

V.K. Chillara, C.J. Lissenden, 2014, “Nonlinear guided waves in plates: a numerical perspective,” Ultrasonics, Vol. 54, pp. 1553-1558.

C.J. Lissenden, Y. Liu, G. Choi, X. Yao, 2014, “Effect of localized microstructure evolution on higher harmonic generation of guided waves,” J. NDE, Vol. 33:178-186.

Y. Liu, C.J. Lissenden, J.L. Rose, 2014, “Higher order interaction of elastic waves in weakly nonlinear circular cylinders. I. analytical foundation,” J. Appl. Phys., Vol. 115:214901.

Y. Liu, E. Khajeh, C.J. Lissenden, J.L. Rose, 2014, “Higher order interaction of elastic waves in weakly nonlinear circular cylinders. II. physical interpretation and numerical simulation,” J. Appl. Phys., Vol. 115:214902.

M.H. Soorgee, C.J. Lissenden, J.L. Rose, A.Yousefi-Koma, 2014, “Defect sensitivity of piezoelectric strip transducers based on planar Lamb waves,” J. Intell. Mat. Struct. Sys., Vol. 25(4), pp. 472-483.

Y. Liu, V.K. Chillara, C.J. Lissenden, J.L. Rose, 2013, “Cubic nonlinear shear horizontal and Rayleigh Lamb waves in weakly nonlinear plates,” J. Appl. Phys., Vol. 114:114908.

H. Kannajosyula, C.J. Lissenden, and J.L. Rose, 2013, “Analysis of annular phased array transducers for ultrasonic guided wave mode control,” Smart Materials and Structures, Vol. 22, 085019 (14 pp).

V.K. Chillara, C.J. Lissenden, 2013, “Analysis of second harmonic guided waves in pipes using a large radius asymptotic approximation for axis-symmetric longitudinal modes,” Ultrasonics, Vol. 53:862-869.

Y. Liu, E. Khajeh, C.J. Lissenden, J.L. Rose, 2013, “Interaction of torsional and longitudinal guided waves in weakly nonlinear circular cylinders,” J. Acoustic Soc. Am., Vol. 133(5), pp. 2541-2553.

B. Ren, C.J. Lissenden, 2013, “Ultrasonic guided wave inspection of adhesive bonds between composite laminates,” Int. J. Adhesives and Adherends, Vol. 45:59-68.

Y. Liu, V. Chillara, C.J. Lissenden, 2013, “On selection of primary modes for generation of strong internally resonant second harmonics in plate,” J. Sound and Vibration, Vol. 332(19):4517-4528.

P. Puthillath, B. Ren, J.M. Galan, C.J. Lissenden, and J.L. Rose, 2013, “Ultrasonic guided wave propagation across waveguide transitions: energy transfer and mode conversion,” J. Acoustic Soc. Am., 133(5), Vol. 2624-2633.

V.K. Chillara, C.J. Lissenden, 2012, “Interaction of guided wave modes in isotropic nonlinear elastic plates: higher harmonic generation,” J. Appl. Phys., Vol. 111(12) 124909 (7 pages).

H. Cho, C.J. Lissenden, 2012, “Structural health monitoring of fatigue crack growth in plate structures with ultrasonic guided waves,” Struct. Health Mon. Int. J. Vol. 11, pp. 393-404.

S. Li, C.J. Lissenden, 2011, “Piezoelectric fiber composite strip transducer design considerations for generating Lamb waves,” J. Intell. Mat. Sys. Struct. Vol. 22, pp. 1345-1358.

P. Puthillath, C. Lissenden, J.L. Rose, 2010, “Inspection of Adhesively Bonded Aircraft Patches using Ultrasonic Guided Waves,” Journal of Nondestructive Testing and Evaluation, India, Vol. 9, pp. 1-5

C.J. Lissenden, 2010, “Experimental investigation of initial and subsequent yield surfaces for laminated metal matrix composites,” Int. J. Plasticity, Vol. 26, pp. 1606-1628.

C.J. Lissenden, 2009, “Experimental yield surface determination for metal matrix composites,” In: Advances in Mathematical Modeling and Experimental Methods for Materials and Structures – the Jacob Aboudi Volume, R. Gilat and L. Banks-Sills, Eds., Springer, pp. 173-185.

C.S. Kim, C.J. Lissenden, I.K. Park, K.S. Rye, 2009, “Dynamic coercivity of advanced ferritic steel during long-term isothermal aging,” Materials Transactions 50, Japan Inst. Metals, 2691-2694.

C.S. Kim, S.I. Kwun, C.J. Lissenden, 2009, “Influence of precipitates and dislocations on the acoustic nonlinearity in metallic materials,” J. Korean Phys. Soc. 55, pp. 528-532.

C.S. Kim, C.J. Lissenden, 2009, “Precipitate contribution to the acoustic nonlinearity in nickel-based superalloy,” Chin. Phys. Lett. Vol. 26(8), 086107 (4 pages).

C.S. Kim, C.J. Lissenden, K.M. Kang, I.K. Park, 2008, “Influence of dislocation substructure on ultrasonic velocity under tensile deformation,” J. Kor. Soc. NDT Vol. 28, pp. 477-482.

B.M. Ross, A. Lakhtakia, C.J. Lissenden, 2007, “Maxwell stress distributions in chiral sculptured thin films due to obliquely incident plane waves,” Optics Communications, Vol. 275, pp. 1-9.

C.J. Lissenden, S.P. Tissot, M.W. Trethewey, and K.P. Maynard, 2007, “Torsion response of a cracked stainless steel shaft,” Fat. Fract. Engng. Mat. Struct. Vol. 30, pp. 734-747.

X. Lei and C.J. Lissenden, 2007, “Pressure sensitive nonassociative plasticity model for DRA composites,” J. Engng. Mater. Tech. Vol. 129, pp. 255-264.

C.J. Lissenden, D. Doraiswamy, and S.M. Arnold, 2007, “Experimental investigation of cyclic and time-dependent deformation of titanium alloy at elevated temperature,” Int. J. Plasticity, Vol. 23, pp. 1-24.

J.L. Rose, J. Mu, L. Zhang, and C.J. Lissenden, 2006, “Long range focused ultrasonic guided waves for corrosion detection in tubular structures,” NACE Conference proceedings.

H. Shen and C.J. Lissenden, 2005, “Stress and strain localization 3D modeling for particle-reinforced metal matrix composites,” Metall. Mater. Trans., Vol. 36A, pp. 1653-1660.

C.J. Lissenden, J.F. Colaiuta, and B.A. Lerch, 2004, “Hardening behavior of three metallic alloys under combined stresses at elevated temperature,” Acta Mech., Vol. 169, pp. 53-77.

P.A. Solimine and C.J. Lissenden, 2004, “Fatigue of beta titanium alloy at 20, 482, and 648 °C,” Fatigue Fract. Engng. Mater. Struct., Vol. 27, pp. 943-955.

Lissenden, C.J. and N.J. Salamon, 2004, “Design project for advanced mechanics of materials,” Int. J. Engng. Education, Vol. 20, pp. 103-112.

Lissenden, C.J. and X. Lei, 2004, “A more comprehensive method for yield locus construction for metallic alloys and composites,” Exp. Mechanics, Vol. 44, pp.10-20.

Iyer, S.K. and C.J. Lissenden, 2003, “Multiaxial constitutive model accounting for the strength differential in Inconel 718,” Int. J. Plasticity, Vol. 19, pp. 2055-2081.

Lei, X. and C.J. Lissenden, 2003, “Tensile, compressive, and shear response of a particulate reinforced aluminum composite,” Composite Materials: Testing and Design Fourteenth Volume, ASTM STP 1436 C.E. Bakis, Ed. ASTM International, West Conshohocken, pp. 255-271.

Shen, H. and C.J. Lissenden, 2002, “3D finite element analysis of particle-reinforced aluminum,” Mat. Sci. Engng. A, Vol. 338, pp. 271-281.

Lissenden, C.J., 2002, “Discussion: A critical reexamination of classical metal plasticity,” J. Appl. Mech. Vol. 69, p.712.

Lei, X. and C.J. Lissenden, 2001, “Finite element simulation of ausforming of austempered ductile iron components,” J. Manufacturing Science & Engng., Vol. 123, pp. 420-425.

Lissenden, C.J., S.M. Arnold, and A.F. Saleeb, 2001, “Plastic coupling and stress relaxation during nonproportional axial-shear strain-controlled loading,” J. Pressure Vessel Technology, Vol. 123, pp. 81-87.

Lissenden, C.J., M.A. Walker, and B.A. Lerch, 2000, “Axial-torsional load effects of Haynes 188 at 650C,” Multiaxial Fatigue and Deformation: Testing and Prediction ASTM STP 1387, (S. Kalluri and P.J. Bonacuse, Eds.) American Society for Testing and Materials, West Conshohoken, PA, pp. 99-125.

Iyer, S.K. and C.J. Lissenden, 2000, “Initial anisotropy of inconel 718: experiments and mathematical representation,” J. Engng. Materials and Technology, Vol. 122, pp. 321-326.

Lissenden, C.J., S.M. Arnold, S.K. Iyer, 2000, “Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures,” Int. J. Plasticity, Vol. 16, pp. 1049-1074.

Iyer, S.K., C.J. Lissenden, and S.M. Arnold, 2000, “Local and overall flow in composites predicted by micromechanics,” Composites B: Engineering, Vol. 31, pp. 327-343.

Gil, C.M., C.J. Lissenden, B.A. Lerch, 1999, “Unusual nonlinear response of some metallic materials,” Mechanics of Materials, Vol. 31, pp. 565-577.

Lissenden, C.J., C.M. Gil, and B.A. Lerch, 1999, “A methodology for determining rate-dependent flow surfaces for inconel 718,” J. Testing and Evaluation, Vol. 27, pp. 402-411.

Gil, C.M., C.J. Lissenden, and B.A. Lerch, 1999, “Yield of inconel 718 by axial-torsional loading at temperatures up to 649°C,” J. of Testing and Evaluation, Vol. 27, pp. 327-336.

Lissenden, C.J., 1999, “Fiber-matrix interfacial constitutive relations for metal matrix composites,” Composites B: Engineering, Vol. 30, pp. 267-278.

Lissenden, C.J. and S.M. Arnold, 1997, “Theoretical and experimental considerations in representing macroscale flow/damage surfaces for metal matrix composites,” Int. J. Plasticity, Vol. 13, pp. 327-358.

Jian, X.H., H.S. Tzou, C.J. Lissenden, and L.S. Penn, 1997, “Damage detection by piezoelectric patches - free vibration approach,” J. Composite Materials, Vol. 31, pp. 345-359.

Lissenden, C.J., B.A. Lerch, J.R. Ellis, and D.N. Robinson, 1997, “Experimental determination of yield and flow surfaces under axial-torsional loading,” in Multiaxial Fatigue and Deformation Testing Techniques, ASTM-STP 1280 (S. Kalluri and P.J. Bonacuse, eds.) American Society for Testing and Materials, Philadelphia, pp. 92-112.

Lissenden, C.J. and C.T. Herakovich, 1996, “Interfacial debonding in laminated titanium matrix composites,” Mechanics of Materials, Vol. 22, pp. 279-290.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1996, “Inelastic deformation of titanium matrix composites under multiaxial loading,” in Life Prediction Methodology for Titanium Matrix Composites, ASTM STP 1253 (W.S. Johnson, J.M. Larsen, and B.N. Cox, Eds.) American Society for Testing and Materials, Philadelphia, pp. 257-277.

Lissenden, C.J., B.A. Lerch, and C.T. Herakovich, 1996, “Response of SiC/Ti under combined loading - part III: microstructural evaluation,” J. Composite Materials, Vol. 30, pp. 84-108.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1995, “Response of SiC/Ti under combined loading - part II: room temperature creep effects,” J. Composite Materials, Vol. 29, pp. 1403-1417.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1995, “Response of SiC/Ti under combined loading - part I: theory and experiment for imperfect bonding,” J. Composite Materials, Vol. 29, pp. 130-155.

Lissenden, C.J. and C.T. Herakovich, 1995, “Numerical modelling of damage development and viscoplasticity in metal matrix composites,” Comput. Methods Appl. Mech. Engng., Vol. 126, pp. 289-303.

Lissenden, C.J., M-J. Pindera, and C.T. Herakovich, 1994, “Stiffness degradation of SiC/Ti tubes subjected to biaxial loading,” Comp. Sci. Tech., Vol. 50, pp. 23-36.

In Proceedings

S. Quayyum, M. Sengupta, G. Choi, C.J. Lissenden, T. Hassan, 2013, “Fatigue and ratcheting experimental responses of Alloy 617 under high temperature multiaxial loading,” Proceedings of the ASME 2013 Pressure Vessels & Piping Conference, PVP2013-97252.

Y. Liu, G. Choi, C.J. Lissenden, J.L. Rose, 2013, “Effect of localized plastic deformation on higher harmonic guided wave mode generation in plate,” In: Structural Health Monitoring 2013, F.-K. Chang, Ed., Destech, Lancaster, pp. *-*.

C.J. Lissenden, A. Lesky, M. Soorgee, 2013, “Ultrasonic guided wave based SHM of a steel shell structure under different operating conditions,” In: Structural Health Monitoring 2013, F.-K. Chang, Ed., Destech, Lancaster, pp. *-*.

Y. Liu, C.J. Lissenden, J.L. Rose, 2013, “Nonlinear ultrasonic guided waves for microstructure characterization of hollow cylinders,” 13th International Symposium on Nondestructive Characterization of Materials proceedings.

Y. Liu, C.J. Lissenden, J.L. Rose, 2013, “Cumulative second harmonics in weakly nonlinear plates and shells,” In: Health Monitoring of Structural and Biological Systems, Proceedings of SPIE, Vol. 8695, T. Kundu, Ed., paper 869528, 12 pages.

V.K. Chillara and C.J. Lissenden, 2013, “Higher harmonic guided waves in isotropic weakly non-linear elastic plates,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 32, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1511, pp. 145-150.

Y. Liu, C.J. Lissenden, J.L. Rose, 2013, “Higher harmonic generation of guided waves in plate: power flux density and synchronism co-analysis for mode selection,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 32, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1511, pp. 151-158.

P. Puthillath, B. Ren, C.J. Lissenden, and J.L. Rose, 2013, “Guided wave mode pairs for transmissibility in adhesively bonded metal plates,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 32, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1511, pp. 199-206.

H. Kannajosyula, C.J. Lissenden, and J.L. Rose, 2013, “Preferential guided wave mode generation and beam steering using amplitude controlled transducer arrays,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 32, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1511, pp. 215-222.

M.H. Soorgee, C.J. Lissenden, J.L. Rose, and A. Yousefi-Koma, 2013, “Planar shear horizontal guided wave inspection of a plate using piezoelectric fiber transducers ,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 32, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1511, pp. 223-229.

M.H. Soorgee, C.J. Lissenden, J.L. Rose, and A. Yousefi-Koma, 2013, “Planar guided waves for SHM of plate structures using piezoelectric fiber transducers,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 32, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1511, pp. 254-261.

P. Puthillath, C.J. Lissenden, J.L. Rose, and J.M. Galan, 2012, “Analysis of ultrasonic guided wave interaction with a waveguide transition,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 31, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1430, pp. 1315-1322.

H. Kannajosyula, C.J. Lissenden, and J.L. Rose, 2012, “Non-linearly phased 2-D array transducers arranged on a cylindrical-polar grid for real time guided wave mode control and steering,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 31, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1430, pp. 945-952.

C.J. Lissenden, W.L. McGill, and S. Li, 2011, “Ultrasonic guided wave SHM for probabilistic fatigue crack growth prognostics,” In: Structural Health Monitoring, F.K. Chang, Ed., DEStech, Lancaster, pp. 1940-1947. C.J. Lissenden, C.B. Masters, S.A. Suliman, and R. Toto, 2011, “Supplemental learning tools for statics and strength of materials,” Proceedings of the 2011 ASEE Annual Conference, AC 2011-1511 (17 pages).

S. Li, C.J. Lissenden, 2011, “Composite piezoelectric strip transducer development for structural health monitoring,” In: Health Monitoring of Structural and Biological Systems, Proceedings of SPIE, Vol. 7984, T. Kundu, Ed., paper 798408, 12 pages.

M.S. Lindsey, E. Khajeh, J.K. Van Velsor, C.J. Lissenden, J.L. Rose, 2011, “In-line corrosion inspection using circumferential and longitudinal ultrasonic guided waves,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 30, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1335, pp. 231-238.

H. Cho, C.J. Lissenden, 2011, “Monitoring fatigue cracks in aluminum joints with ultrasonic guided waves,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 30, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1335, pp. 145-152.

H. Kannajosyula, C.J. Lissenden, 2011, “Lamb-like wave mode selection algorithm for multilayer plate NDE,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 30, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics Proc. 1335, pp. 191-198.

C.J. Lissenden, S. Li, J.L. Rose, 2010, “Continuous piezoelectric health monitoring systems based on ultrasonic guided waves,” In: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Proceedings of SPIE, Vol. 7647, M. Tomizuka, Ed., paper 747-77, 12 pages.

C.J. Lissenden, R.B. Then, S. Li, C. Xiao, M. Lopez, J.L. Rose, 2010, “Rayleigh surface waves for characterization of the air void system in fresh concrete,” In: Health Monitoring of Structural and Biological Systems, Proceedings of SPIE, Vol. 7650, T. Kundu, Ed., paper 7650-29, 11 pages.

H. Kannajosyula, C.J. Lissenden, J.L. Rose, 2010, “Inhomogeneous interface waves in a thin layer between half spaces and their relationship to Lamb waves,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 29, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics, in-press.

C.J. Lissenden, H. Cho, C.S. Kim, 2010, “Fatigue crack growth monitoring of an aluminum joint structure,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 29, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics, in-press.

H. Kannajosyula, P. Puthillath, C.J. Lissenden, J.L. Rose, 2009, “Interface waves for SHM of adhesively bonded joints,” In: Structural Health Monitoring 2009, F.-K. Chang, Ed., Destech, Lancaster, pp. 247-254.

C.J. Lissenden, 2009, “Yield criterion verification for a laminated metal matrix composite from axial-torsional loading,” In: Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue, and Fracture, A.S. Khan and B. Farrokh, Eds., Neat Press., pp. 121-123.

F. Yan, C.J. Lissenden, J.L. Rose, 2009, “Directivity profiles of ultrasonic guided wave phased array for multilayer composite plates,” In: Health Monitoring of Structural and Biological Systems, Proceedings of SPIE, Vol. 7295, T. Kundu, Ed., paper 729514, 11 pages.

Puthillath, P.K., H. Kannajosyula, C.J. Lissenden, and J.L. Rose, 2009. “Ultrasonic guided wave inspection of adhesive joints: a parametric study for a step-lap joint,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 28, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics, pp. 1127-1133.

C.J. Lissenden, J.L. Blackshire, and P.K. Puthillath, 2009, “Structural health monitoring of composite laminates with embedded piezoelectric fibers,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 28, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics, pp. 974-981.

C.J. Lissenden and J.L. Rose, 2008, “Structural health monitoring of composite laminates through ultrasonic guided wave beam forming,” NATO Applied Vehicle Technology Symposium on Military Platform Ensured Availability Proceedings, RTO-MP-AVT-157, P1, 13 pages.

P.K. Puthillath, F. Yan, H. Kannajosyula, C.J. Lissenden, J.L. Rose, C. Xu, 2008, “Inspection of adhesively bonded joints using ultrasonic guided waves,” World Congress on Nondestructive Evaluation Proceedings, China, (6 pages).

C.J. Lissenden, P.K. Puthillath, and J.L. Rose, 2008, “Guided wave feature identification for monitoring structural damage in joints between composite plates,” Materials Forum Vol. 33, Steve Galea (Ed.) Materials Australia, pp. 279-285.

C.J. Lissenden, J.L. Blackshire, and P.K. Puthillath, 2008, “Integrated structural health monitoring with guided waves from piezoelectric fibers,” ASME Smart Materials, Adaptive Structures, Intelligent Systems Conference Proceedings, paper number SMASIS08-325.

C.J. Lissenden, N.J. Salamon, A.J. Miller, 2008, “ Design project design for an elementary strength of materials course,” 2008 ASEE Annual Conference Proceedings, AC 2008-1350, 16 pages.

P.K. Puthillath, F. Yan, C.J. Lissenden, J.L. Rose, 2008, “Ultrasonic guided waves for the inspection of adhesively bonded joints,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 27, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics pp. 200-206.

H. Gao, J.L. Rose, C.J. Lissenden, 2007, “Ultrasonic guided wave mode selection and tuning in composites using a piezoelectric phased array,” In: Structural Health Monitoring 2007 (F.K. Chang, Ed.), DEStech Publications, Lancaster, pp. 1668-1675.

C.J. Lissenden, F. Yan, E.T. Hauck, D.M. Noga, and J.L. Rose, 2007, “Internal damage detection in a laminated composite plate using ultrasonic guided waves,” In: Review in Quantitative Nondestructive Evaluation, Vol. 26B, D.O. Thompson and D.E. Chimenti, Eds., American Institute of Physics, pp. 1029-1035.

J.L. Rose, J. Mu, L. Zhang, and C.J. Lissenden, 2006, “Long range focused ultrasonic guided waves for corrosion detection in tubular structures,” In: Corrosion 2006, NACE International, Houston, Paper 06263, 13 pages.

C.J. Lissenden, D. Doraiswamy, P.A. Solimine, S.M. Arnold, 2005, “Experimental investigation of cyclic and time-dependent deformation of titanium alloy at elevated temperature,” In: Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling, A.S. Khan and A.R. Khoei, Eds., Neat Press, pp. 217-219.

S.M. Arnold, A.F. Saleeb, L. Powers, C.J. Lissenden, 2005, “High temperature characterization and prediction of Timetal 21S cyclic and cyclic-relaxation deformation behavior using a multimechanism viscoelastoplastic model,” In: Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling, A.S. Khan and A.R. Khoei, Eds., Neat Press, pp. 175-177.

M.S. Lebold, M.S., K. Maynard, K. Reichard, M. Trethewey, D. Bieryla, C. Lissenden, D. Dobbins, “Using torsional vibration analysis as a synergistic method for crack detection in rotating equipment,” IEEE Aerospace 2004, March 2004.

Lissenden, C.J., G.S. Wagle, N.J. Salamon, 2002, “Design project for advanced mechanics of materials,” Proceedings of the 2002 American Society for Engineering Education Annual Conference & Exposition, ASEE.

Lissenden, C.J., G.S. Wagle, N.J. Salamon, 2002, “Applications of finite element analysis for undergraduates,” Proceedings of the 2002 American Society for Engineering Education Annual Conference & Exposition, ASEE.

Lissenden, C.J. and H. Shen, 2001, “Finite element modeling of discontinuously reinforced aluminum in 2D and 3D,” Affordable Metal-Matrix Composites for High Performance Applications (A.B. Pandey, K.L. Kendig, and T.J. Watson, Eds.) The Minerals, Metals, and Materials Society, Warrendale, OH.

Lissenden, C.J. and R.P. McNitt, “Catastophic failures, designed for failure, and adventures in mechanics one credit freshman mechanics seminars, Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition, ASEE.

Colaiuta, J.F., C.J. Lissenden, and B.A. Lerch, 2001, “Behavior of three metallic alloys under combined axial-shear stresses at elevated temperature,” Proceedings of the Sixth International Conference on Biaxial/Multiaxial Fatigue and Fracture (M.M. de Freitas, Ed.) European Structural Integrity Society, pp. 901-908.

Lissenden, C.J., 2000, “Plastic coupling and stress relaxation during nonproportional axial-shear strain-controlled loading,” in Understanding and Predicting Material Degradation PVP-Vol. 413 (R. Mohan, ed.) ASME, New York, pp. 111-117.

Iyer, S.K. and C.J. Lissenden, 1999, “Initial anisotropy of inconel 718: experiments and mathematical representation,” in Advances in Life Predition Methodology PVP-Vol. 391 (R. Mohan, ed.) ASME, New York, pp. 101-110.

Lissenden, C.J., O.F. Yalcin, and S.K. Iyer, 1998, “Evolution of state in a titanium matrix composite under biaxial tension,” in Proceedings of the Eighth Japan-U.S. Conference on Composite Materials (G.M. Newaz and R.F. Gibson eds.) Technomic, Lancaster, pp. 325-334.

Lissenden, C.J. and S.M. Arnold, 1998, “Effect of microstructural architecture on flow/damage surfaces for metal matrix composites,” in Damage Mechanics in Engineering Materials (G.Z. Voyiadjis, J.L. Chaboche, and J.W. Ju eds.) Elsevier, Amsterdam, pp. 385-400.

Lissenden, C.J. and S.M. Arnold, 1996, “Critique of macro flow/damage surface representations for metal matrix composites,” in Proceedings of the ASME Aerospace and Materials Divisions AD-Vol. 50/MD-Vol. 73 (W.S. Chan, M.L. Dunn, W.F. Jones, G.M. Newaz, P.V.D. McLaughlin, and R.C. Wetherhold, eds.) American Society of Mechanical Engineers, New York, pp. 283-309.

Lissenden, C.J., 1996, “An approximate representation of fiber-matrix debonding in nonperiodic metal matrix composites,” in Damage and Interfacial Debonding in Composites (G.Z. Voyiadjis and D.H. Allen, eds.) Elsevier, Amsterdam, pp. 189-212.

Lissenden, C.J. and C.T. Herakovich, 1994, “Modelling interfacial debonding in titanium matrix composites,” Inelasticity and Micromechanics of Metal Matrix Composites (G.Z. Voyiadjis and J.W. Ju, Ed.) Elsevier Science, Amsterdam, The Netherlands, pp. 239-259.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1994, “Damage induced room temperature creep of titanium matrix composites,” Durability of Composite Materials MD- Vol 51 (R.C. Wetherhold, Ed.) The American Society of Mechanical Engineers, New York, pp. 39-49.

Lissenden, C.J., M-J. Pindera, and C.T. Herakovich, 1992, “Response of SiC/Ti tubes under biaxial loading in the presence of damage,” Damage Mechanics in Composites, (D.H. Allen and D.C. Lagoudas, Eds.) AMD-Vol. 150/AD-Vol. 32, The American Society of Mechanical Engineers, New York, pp. 73-90.

Lissenden, C.J. and C.T. Herakovich, 1992, “Comparison of micromechanical models for elastic properties,” Engineering, Construction, and Operations in Space - Volume 2, (W.Z. Sadeh, S. Sture, and R.J. Miller, Eds.) The American Society of Civil Engineers, New York, pp. 1309-1322.

As NASA Sponsored Reports

Iyer, S.K., C.J. Lissenden, and B.A. Lerch, “Plastic flow in inconel 718 under biaxial loading – initial anisotropy,” HITEMP Review 1999, NASA CP-1999-208915/Vol. 2, NASA Glenn Research Center, Cleveland, Paper 34.

Lissenden, C.J., S.M. Arnold, and S.K. Iyer, 1998, “Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures,” NASA TM-1998-208805, NASA Lewis Research Center, Cleveland, OH.

Gil, C.M., C.J. Lissenden, and B.A. Lerch, 1998, “Determination of yield in inconel 718 for axial-torsional loading at temperatures up to 649°C,” NASA TM-1998-208658, NASA Lewis Research Center, Cleveland, OH.

Gil, C.M., C.J. Lissenden, B.A. Lerch, 1998, “An investigation of anomalous behavior in metallic-based materials under compressive loading,” NASA TM-206640, NASA Lewis Research Center, Cleveland, OH.

Lissenden, C.J. and S.M. Arnold, 1997, “Factors influencing inelastic flow under multiaxial stress states: a perspective of their importance to composites,” HITEMP Review 1997, NASA CP-10192, NASA Lewis Research Center, Cleveland, Paper 38.

Gil, C.M., C.J. Lissenden, B.A. Lerch, 1997, “Investigating anomalous behavior in SiC/Ti specimens for flow surface experiments,” HITEMP Review 1997, NASA CP-10192, NASA Lewis Research Center, Cleveland, Paper 39.

Lissenden, C.J. and S.M. Arnold, 1996, “Critique of macro flow/damage surface representations for metal matrix composites,” NASA TM-107321, NASA Lewis Research Center, Cleveland, OH.

Lissenden, C.J., B.A. Lerch, J.R. Ellis, and D.N. Robinson, 1996, “Verification of experimental techniques for flow surface determination,” NASA TM-107053, NASA Lewis Research Center, Cleveland, OH.

Lissenden, C.J., C.T. Herakovich, and M-J. Pindera, 1993, “Inelastic deformation of metal matrix composites,” NASA Contractor Report 191522.

research/cjl9/pubs.txt · Last modified: 2016/09/29 19:42 by cjl9

 
Recent changes RSS feed Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Edit